Healthcare Price Transparency

Build a Reimbursement Benchmark for a New Payer Contract

A step-by-step method for benchmarking a proposed payer contract rate against local negotiated rates and the Medicare fee schedule.

The best way to build a reimbursement benchmark for a new payer contract is to compare like-for-like commercial negotiated rates at the CPT code and location level, then express the proposed rate two ways: as a dollar amount against the local market, and as a percent of the applicable Medicare rate. Hold the service, setting, provider type, and geography constant. Report the median, the percentile range, and the number of records behind each result.

A benchmark is only as strong as its comparison set. One national number will not survive a negotiation. A documented local distribution will.

How do you benchmark reimbursement rates for a new payer contract?

Build a comparison set of negotiated rates for the same CPT code, location, provider type, and site of care, then calculate market percentiles and percent of Medicare for each code in the contract.

  1. Define the contract population. List the codes that drive revenue under this contract, the locations where they are delivered, and the entity that will hold the contract.
  2. Normalize service and provider attributes. Separate professional from facility rates, and note modifiers, units, and place of service.
  3. Select comparable negotiated rates. Pull rates for the same codes and setting from peer providers in the same market, across payers.
  4. Calculate both benchmarks. For each code, find the local median and percentile range in dollars, and the same figures as a percent of Medicare.
  5. Review the distribution. Check the record count, look at outliers, and see where the proposed rate falls.
  6. Document exclusions and assumptions. Write down what you removed and why, so the other side cannot dismiss the number.

Start with the codes that matter. A short list that covers most of the contract's revenue is more useful than a benchmark of every code on the fee schedule.

What data should a negotiated rate benchmark include?

Each row should keep the fields needed to prove the comparison is fair and to reproduce the result.

FieldWhy it belongs in the benchmark
CPT or HCPCS codeDefines the service being priced
Payer, plan, and networkRates vary by insurer and by product line
Provider or provider groupIdentifies the contracted entity by NPI and TIN
Facility or professional settingThe same code pays differently by setting
Location and geographic groupingSets the local market and the Medicare locality
Negotiated rate and rate typeKeeps dollar rates apart from percentage arrangements
Modifier and unitsChange what a dollar amount actually covers
Medicare reference amountThe independent yardstick for the same service and locality
Percent of MedicareMakes rates comparable across markets and codes
Record countShows how much evidence sits behind each statistic
File date and effective dateShows how current the comparison is

Not every published file carries every field. Use them when they are present, and say so when they are not.

How do you calculate percent of Medicare for a negotiated rate?

Divide the commercial rate by the Medicare rate for the same service, setting, and locality, then multiply by 100.

Percent of Medicare = negotiated commercial rate / applicable Medicare rate x 100

For physician services, the reference is the Medicare Physician Fee Schedule. Medicare has paid physicians and other billing professionals under it since 1992, and CMS publishes relative value units and payment policy indicators for more than 10,000 physician services. Three things have to match before you divide:

  • Locality. CMS sets a geographic practice cost index for every Medicare payment locality, so the Medicare amount for the same code differs by market.
  • Setting. The fee schedule has separate facility and non-facility amounts. Use the one that matches where the service is delivered.
  • Year. The conversion factor changes annually, and so does every Medicare amount built on it.

The year matters more than usual right now. For 2026, CMS set the conversion factor at $33.57 for qualifying APM participants and $33.40 for everyone else. Under the CY 2027 final rule, those drop to $32.95 and $32.63 on January 1, 2027.

That cuts both ways in a contract. A rate written as a percent of Medicare pays fewer dollars when the conversion factor falls, all else equal. A rate fixed in dollars looks richer as a percent of Medicare. State which year's fee schedule your benchmark uses, and if the contract is pegged to Medicare, check which year it references.

One side note for teams reviewing nonparticipating physician payment: CMS calculates the Medicare limiting charge by multiplying the fee schedule amount by 1.0925.

How should you compare rates by insurer?

Compare insurers only within the same service, market, provider class, and billing context. Then report the same statistics for each payer:

  • Median negotiated rate.
  • 25th and 75th percentiles.
  • Median percent of Medicare.
  • Number of comparable records.
  • The gap between the proposed rate and each payer's median.

This tells you whether the payer across the table pays your peers more than it is offering you, and how its offer compares with what other payers pay in the same market. Do not call a payer high or low in general. Say high or low for which codes, in which market, against which comparison set.

How should you compare rates by provider?

Hold the code, geography, setting, and payer constant, then place the provider's proposed rate against its local peers.

A useful provider comparison shows five numbers for each code: the proposed rate, the local median, the proposed rate's percentile position, the median for this specific payer, and the percent of Medicare. Keep provider-specific contract terms, such as carve-outs and escalators, separate from the market-wide rate distribution. They explain differences. They do not belong in the median.

Why does location change a negotiated rate benchmark?

Location changes both sides of the comparison: the Medicare reference amount and the group of commercial rates you are comparing against. A national or state median can hide the local contracting conditions that actually set the price.

Define the geographic rule and put it in the methodology. A county, a metro area, and a radius around a facility will each give a different answer. Go as local as the record count allows, and widen the market only when a code has too few records to support a median.

What statistics should a payer-contract benchmark report?

Report a median, a percentile range, a record count, and a percent of Medicare for every comparison you plan to rely on.

  • Median negotiated rate: the midpoint of the comparison set. Half the rates are at or below it.
  • 25th and 75th percentiles: the middle half of the market. Most negotiations happen inside this band.
  • Proposed-rate percentile: where the offer on the table sits in the local distribution.
  • Median percent of Medicare: the same market, expressed against an independent yardstick.
  • Minimum record threshold: the smallest comparison set you will report. Flag anything below it.
  • Date range and exclusion rules: what period the data covers and what you removed.

A median answers "what is typical." A percentile answers "where does this offer rank." A contract benchmark needs both.

What should you exclude from a negotiated rate comparison?

Exclude anything that is not the same service under comparable terms:

  • Mismatched settings, such as facility rates in a professional comparison.
  • Unlike provider types.
  • Percentage-based arrangements mixed into dollar calculations.
  • Records with different modifiers, units, or bundling.
  • Records with no usable location.
  • Implausible values and rates tied to contracts no longer in use. These zombie rates skew a median if they stay in.

There is no universal outlier rule. Pick one, apply it to every code, and state it.

Methodology note: every benchmark should state the service definition, location rule, provider type, payer grouping, date range, Medicare reference and year, percentile method, minimum record count, and exclusion criteria. If the other side cannot see how the number was built, they will not accept it.

Should you use negotiated-rate data or claims-based benchmarks?

For a contract negotiation, use negotiated-rate data. It shows the actual contract terms payers and providers disclose under federal price transparency rules, by payer, plan, network, and provider.

Claims-based benchmarks pool historical payments from many payers into percentile estimates. They are aggregated, so you cannot see what this payer pays your direct competitors. They are backward-looking, since claims have to be paid and pooled before they reach the benchmark. They can serve as a broad market reference. They cannot tell you what the payer across the table has already agreed to pay someone else.

How can Gigasheet help with negotiated rate benchmarking?

Gigasheet provides nationwide negotiated-rate data across payers and providers, paired with geographically adjusted Medicare benchmarks, so the comparison set and the Medicare reference are already matched.

  • Price Transparency Explorer: search by code, payer, provider, and market, and see the rate distribution and percent of Medicare directly.
  • Provider Rate Scores: see where a provider's negotiated rates sit in the local market, from Bottom of Market to Top of Market.
  • Smart Rate: automatically excludes outliers and non-comparable rates.
  • AI agent: ask a benchmarking question in plain language and get the answer with the backing data.
  • API and bulk data: run benchmarks in your own contract-modeling tools or warehouse.

Every figure traces back to its source file, so the benchmark holds up when the payer asks where it came from.

For the negotiation itself, see our guide to negotiating stronger payer contracts with price transparency data. For the statistics, see how to find the median commercial rate.

See pricing or Request a Demo to benchmark your own contract.

Last reviewed November 13, 2026. Medicare conversion factors reflect the CY 2026 and CY 2027 Physician Fee Schedule final rules.

Frequently Asked Questions

How do you benchmark a new payer contract rate?

Compare the proposed rate with negotiated rates for the same CPT code, setting, and provider type in the same local market. Report where it falls against the median and the 25th to 75th percentile range, and express it as a percent of Medicare.

What is a good negotiated rate benchmark?

There is no universal number. A sound benchmark is one that names its comparison set: the codes, market, provider type, payers, date range, and record count behind each statistic.

How do you calculate a commercial rate as a percent of Medicare?

Divide the commercial rate by the Medicare amount for the same code, setting, and locality, then multiply by 100. Use the Medicare fee schedule year that matches your contract period.

Should a payer contract benchmark use median or percentile rates?

Both. The median shows what is typical in the market. The percentile shows where a specific offer ranks, which is what matters in a negotiation.

How do you compare negotiated rates across insurers?

Hold the code, market, setting, and provider class constant, then compare each payer's median, percentile range, and median percent of Medicare. Report the record count for each payer.

How do you benchmark a provider's reimbursement rate in a local market?

Build a peer group with the same service, setting, and provider type in the same market. Place the provider's rate against the peer median and percentile range, overall and for the specific payer.

Why should negotiated rates be segmented by CPT code and location?

Each code is priced separately, and both commercial rates and Medicare amounts vary by market. Blending codes or markets produces a number that describes no actual contract.

What Medicare fee schedule should be used for physician reimbursement benchmarking?

The Medicare Physician Fee Schedule, using the amount for the correct locality, setting, and year. The conversion factor falls on January 1, 2027, to $32.95 for qualifying APM participants and $32.63 for other clinicians.

What is the difference between a negotiated rate benchmark and a billed-charge benchmark?

A negotiated rate is what a payer has contractually agreed to pay. A billed charge is what a provider bills before any contract adjustment. Contract negotiations should be benchmarked against negotiated rates.

How much data is enough for a negotiated-rate benchmark?

There is no fixed rule. Set a minimum record count before you start, report the count beside every statistic, and widen the market or flag the result when a code falls below it.

Similar posts

Healthcare price intelligence

National Coverage
Scored & Benchmarked Rates
Expert Support
Request a Demo
LOW $1,804
MEDIAN $6,537
HIGH $21,743

By using this website, you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts. View our Privacy Policy for more information.